Assembling the KitchenAid Sifter + Scale Attachment
Installing the swivel chute
- Lower the swivel chute into the sifter housing at an angle, aligning the marks on the swivel chute with the marks above the notches on the inside of the sifter housing. Swivel chute will be seated securely in the sifter housing and will rotate easily once it is correctly installed.
TIP: Align the handle tab on the chute with one of the notches as you lower the swivel chute into the sifter housing to line up the marks.
Installing the sifter assembly
- Lower the sifter into the sifter housing at an angle so that the drive shaft can be inserted into the sifter housing. Once the shaft is inserted all the way, press down on the sifter, opposite of the shaft, to click it into place.
Installing the scale
- Place the scale on top of the sifter housing with the digital scale display facing away from the Stand Mixer, and slightly left of center. Twist the scale counterclockwise until it locks into place.
Installing the ingredient hopper
- Align the ingredient valve with the corresponding notch on the scale, and lower the hopper onto the scale until fully seated.
Still need help? Contact us or schedule service.
Please contact us or click below to make an appointment from our preferred list of service providers for service on your appliances.
Interested in purchasing an Extended Service Plan?
Please click below to learn more on how you can save up to 25% on New Appliance Extended Service Plans within 30 days of your appliance purchase.