White Beater Coat Chipping - Stand Mixer
Coated beater and dough hook planetary shaft attachments provided with KitchenAid stand mixers consist of a cast aluminum base material coated with a food-grade polyester-based powder coating. The cast aluminum base component elements are either US FDA Generally Regarded as Safe or as acceptable for US FDA Indirect Food Contact.
Is the side of beater chipping?
Hitting the flat beater on the side of the bowl to release ingredients can weaken the coating on the side of the beater, causing it to chip. It is essential to use a spatula to remove ingredients from the flat beater.
Is the bottom of flat beater chipping?
If the bottom of your beater is chipping, it may be too low and is hitting the bottom of the bowl—you may need to adjust your mixer. Your mixer is adjusted for optimum mixing at the factory, but through time and use, it can change, and it should be readjusted.
CLICK HERE for a video showing how to adjust the beater to bowl clearance.
Is the top of beater chipping?
It is important to take care when attaching and removing the flat beater on the beater shaft. Using excessive force can cause chipping in that area. Make sure to locate and align the "keyhole" on the bottom of the beater with the notch on the beater shaft when attaching prior to twisting in place.
Still need help? Contact us or schedule service.
Please contact us or click below to make an appointment from our preferred list of service providers for service on your appliances.
Interested in purchasing an Extended Service Plan?
Please click below to learn more on how you can save up to 25% on New Appliance Extended Service Plans within 30 days of your appliance purchase.